 View Advertiser Index
|
Posted on 5/2/2012 10:13:06 PM
|
heads, springs, tie rods, floater housing, hubs
4.75 bolt pattern Used Floater hubs complete with brgs, rotors and lug nuts. Used Ace\winters\prc brand. $200 pair
New 5 on 5 winters\prc hubs, complete with brgs, lug nuts, seals etc. NEW. $300 pair
60 inch centered floater housing. NEW $400 Ultrashield full containment seat 16 inch. located in Newton Iowa. $400
RHS cast iron heads, CnC ported by Hvh and assembled by Jim Wyman, some hand port work in chambers around plugs. fereah hollow valves, 2.02/1.6. Isky springs, ten degree locks, retainers, screw in pro series 7/16 studs. $2000 complete dyno time only Due to rules changes.
13 inch 180 lb afco rear spring. $25
5.5x9.5 springs 1100/1200/1300 $10 each
New 15% reduction krc serpentine lower pulley. $20 shipped.
Used serpentine krc pulleys 3.5 lower and uppers. 1-1 $10 each
Used Krc lower pulley and piece that mounts to the balancer. Serpentine. 3.5 not r lock. $20 both
Crower ultra light 41# gun drilled mains and rods and seriously profiled throws! 434 crankshaft. Used. .010 400 mains, 2� st rods. Big block snout. Also have low nights Ati Balancer for this. Both $1400
Mahle flat top 434 pistons. 4.165 bore 1.00 pin height for 434,406 or 377 depending on rod length. NEW pistons with -5cc valve reliefs. New pins and locks included. $425 Cleaned and checked double hump head cores, bare. $50 each
Steering wheel quick release and part you weld to shaft.$10
11\16 new outer tie rods. Trw brand. Fit chevelle, camaro etc. $10 each have 4
Contact Information:
Jeff, Mc Clelland,Ia Phone: (712)310-1183 Email: [email protected]
|
|
|
|