View Advertiser Index
|
Posted on 8/27/2013 8:44:09 AM
|
A bunch of parts some new. SELL OUT
Bare sand blasted metric frame straight and ready to build $300
99 pontiac grand prix body, roof quarters already removed, includes front fenders. $600
Steel hand made 99 Pontiac doors $70 each
Aluminum hoods for stock cars, big enough to be trimmed for new or old body style, have nice body lines, these are off full size cars from the 90s. $140 each
567/620 3rd members. Used in great shape, lightened cut ring gear, lw full spool. Short narrow yokes. $450 in tote.
Used IMCA hoosiers, 1-3 nights on them. $50 each all measure 5.5 32nds or more tread depth. All are freshly ground and sized.
NEW r2c performance cleanable air cleaners. 4x14. These are the sportsman series, replace wix, napa etc. $50 each
Holley 4 barrel to 4412 two barrel carb adapter, new all phenolic insulating type. Bottom has been custom radiused. NEW $35.00
New custom cut camshaft. stock car sportmod hobby. I bought these is bulk to get a discount. $200
15 inch alum steering wheel with black grip material on it. Longacre brand I think. $25 used
New 11.75 speedway .810 rear rotors. $20 each
4.75 bolt pattern Used Floater hubs complete with brgs, rotors and lug nuts. Used Ace\winters\prc brand. $200 pair
NEW Longacre lw alum splined steering wheel quick release.. This is the 360 degree release type. $40 splined part is cut off shaft, never raced, just welded on and cut off later. http://www.longacreracing.com/catalog/item.asp?id=509&catid=15
New sbc valve springs 1.46 diameter 130/350#. NEW in box with ten degree new comp cams steel retainers and new locks. $95 all.
Eurethane oem type transmission mounts, $5 each used
vortec Edelbrock Performer #2716 aluminum intake, IMCA spec intake. $100.
New Mr Gasket cork and rubber vortec valve cover gaskets. These are great to clue to the valve cover! $5 a set. I have two new sets
New sbc solid lifters $60
Accell plug wires. Hei 90 degree boots on ends. Black high temp ones with separators. $25
Used seats with cover. Have many NEW and used. $50 to $125
Used sbc custom cam and lifter. Oiling lifters. $75 good stock car, sportmod, hobby stock cam
NEW Solid axles 31 spline. 31� and 28-30.5� cut to fit. $55 each
NEW gun drilled 31 spline axles. 29.5� and 31�. $ 90 each
Used solid 31 spline axle 32.5 $50 grand national tapered type
USED 31 spline solid axle 28.5 qty2 $50 grand national tapered type
Gooseneck hitch extender\cushioned ride. This goes on your trailer and moves it back 9� to give you more room between the cab and trailer as well as cushion the trailer to truck with the rubber isolaters. Used for a short bed truck to gain more cab room. Isolators cushion the ride so you cant feel the trailer riding back there with this in place. Its for the 4.5 square gooseneck. I have pics. $400
14 inch alum air cleaner base with sure seal o ring. $10 each have two both offset style not centered. Both have sure seal spacer on them also.
New 15% reduction krc serpentine lower pulley R Lock. $20 .
1 inch carb spacer like hvh super sucker used. $50
Master disconnect switch for battery. $10 each have 2
On off switch panel with toggle and push button and light, rebco brand. $10
Bsb double sided pinion mount for ford nine inch. $50
Chevelle lower a arms bare, NEW widen track each side. $120 pair
Fan spacer like new with bolts 2 inch $5
Metric spindles with one night raced hubs, new long 4 inch studs. Spindles are already reamed for large lower ball joint. $175 all
New metric stock car 2 inch drive shaft 52.5 $175 each
NEW 2013 JDR performance 500 IMCA gauge legal carb. $450
Used 1 night 2013 Jdr performance 350cfm carb $350
Used Bushore direct drive power glide. Ultra light version, alum drum etc. $500 each
Metric lower a arms dirty cores. $45 each
Metric lower a arms sand blasted and bushings ball joints removed. $55
New metric front rotor in box Us brake. $45
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
