View Advertiser Index
|
Posted on 11/9/2007
|
pistons, rods clutches and more
lw alternator and mounts pulleys for serpentine etc. used 14 nights, imca made illegal. speedway part number 910-68120 $ 150
double hump head cores,041,186,462,461 $150 a set
stock type clutch set up, custom built, steel flywheel, all steel clutch, solid disc with metalic friction pads, full 360* disk, should last a lifetime. total wt 37lbs. $150.00
Scattershield with bottom cut off, IMCA legal lightened nicely to 18lbs $100.00
Scattershield with bottom cut off, IMCA legal, with tilton hyd brg in it,new seal, works great. $200.00
non IMCA 15x8 black wheel 5x5 3 inch backspace $20.00
305 out of 80 camaro, 98,000 miles no intake manifold on it, no smoke ran great. $75.00
steel saginaw ps pump with large alum v belt race pulley, uses remote reservoir $50.00
one brake floater for metric caliper. $5.00
one head mount ps pump mount $5.00
4 hole plastic 1 inch spacers $5.00
alum 4 barrel to 2 barrel carb adapters $5.00 each mr gasket\td etc.
weind stealth intake manifold $75.00
edelbrock performer 2101 $75.00 like new
350 4 bolt block, straight main line $150
350 2 bolt block, straight main line $100
350 stock crank std std $25.00
4.155 pistons,stock rods. Keith Black #127, .100 dome. 10 nights, balanced. $200.00
4.155 Keith Black #125 Flat top (partial set 6)stock rods with ARP bolts. $75.00
4.030 pistons\Rods. Keith Black #111,.100 dome,rods are polished x rods,have childs albert dura moly rings on them, 2 nights old. $250.00
4.00 Ross Flat top pistons. (6 used 2 new) 5.7 rod. with pin &locks $200.00
NEW Ross FT 4.00 bore\5.7 rod\3.8 stroke. custom pistons, with pins &locks $350.00
race ready heads
"040" Gm 64cc heads, no humps on front from factory,look like smog heads, 1.94\1.5 manley race flo undercut lw valves, 10 degree locks,kmotion springs,ran 5 nights and rebuilt. All new seats in both heads. $400.00 Ready to Bolt on. screw in studs plates
461 ss exh valves, 194\15 2 nights on them. $200.00
461 screw in studs plates, 2.02 1.6 valves steel, one head needs two intake seats replaced leak a little thru hairline cracks. $200.00
Contact Information:
Jeff J.
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
