View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
350 +080 sp cast piston, 4 bolt block, stock rods, cast crank, hastings rings, Fed Mog bearings, rebuilt just to throw in your old hunting truck or beater.Complete motor ready to drop in $700
393 CI BRC forged Flat top pistons, these use a 5.7 rod, and a 3.625 stroke. $250
KiethBlack hyper pistons, 350 +060,388 dome, for use with 6" rods and 3.480 stroke.$200
412ci pistons, 400 +030, uses 6" rods, and a 3.800 stroke crank $200
Lunati 4340 forged crank, 3.502 indexed stroke, $400
BBC Forged Steel Crank, call for details.
Lots of new bearings and rings on hand.
New old stock bearings, call for details,
Several sets of 882 heads cleaned and crack checked, $75
186 heads, some light port work ,cleaned and crack checked, sufaced, originbal valve sizes. bare $175
Used cams, some with only a few laps on them.$25-$50
(2)Rebuilt Powerglides, One has an ATD Valve body, ready to bolt in. $450,,, $300
NEW FLYWHEELS, $15
NEW GIUDE PLASTES $10 a set ( Made in out shop)
NEW BALANCE PLATES, $9 ( Made in our shop )
NEW SEAL-UP STORAGE KITS $25 ( Made in our shop )
We build custom brackets, 1 or how ever many you need, call?
Wharehouse clean out listed below
SBC headers for a 4 wheel drive pickup $20 realy nice shape
BBC headers for a 4x4 $15
Late Model headers, $20 for all(2 sets)
2 Diesel starters, 6.2 excellant shape $50, $75
Chevy sbc starters, $5-$10
Turbo 400 trans, $100
Exhaust manifolds, $3 pr,
2 and 4 barrell intakes,starting at $5
lots of 2 barrell carbs $15
Fuel pumps, $3
Forged steel cranks that need repaired, cheap
Pioneer good used AM/FM/Casset player,$50 guaranteed.
8 bolt wheels, white spoke type, need repainted.$???
( 1 set left) car ramps $10
Valve Seat Grinder, might need new stones but otherwise complete. $300
Air impacts, $10
Air ratchets, $10
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
