View Advertiser Index
|
Posted on 10/4/2011 12:27:01 PM
|
F/S LW 383 Complete
Complete 383 c.i. � Intake to oil pan � Balanced
$4500.00 OBO (Can see run on test stand w/ gauges)
�All refreshed (New Brgs, Rings, Oil Pump, Head/Valve Job)
�13.0:1 +/- Compression (w/ 49/50 cc heads)
�Heads: Iron Eagle; 49 cc; 180 cc runners
oCompletely gone through
oScrew-in-Rocker Studs (3/8�)
oComp Cam Roller-tip Rockers (1.6)
oPoly-Lock �Cool Nuts�
oValves: 2.02 / 1.6
o3 angle Valve Job
oIn/Ex Ports match ported
oARP Head Bolts
�Pistons
oWiseco Forged (K261A35) (0.035)
o13.0:1 � 49-50cc
oFlat Top � Two Valve Relief
o6.0 Rod
oFloated wrist pin
oApprx wt w/ pin: 337 grams
�Cam (Custom Cams Inc.)
oSmall Base
oGross Lift: In � .543; Ex - .543
oDur @ .050: In � 254; Ex � 254
oLob Sep: 108 Deg
�Lifters: (Custom Cams Inc.)
oSolid Lifter w/ Oiling Hole
�Rods (Scat ICR6000)
o4340 I Beam 6.00� Bushed
oLight weight
oARP Wave-Loc Rod Bolts
�Crank: Eagle Cast-Steel crank
�Misc:
oNew Stewart Warner Stage 3 Alum Water Pump; Short; high flow; 3/4� Brg; 5/8� Shaft
oAlum DBL groove pulleys
oCast OE 4 bbl Quadra jet intake (Gutted Out)
o7 qt oil pan w/ reusable gasket
oNew Melling 55HV oil pump
oCloyes double roller timing chain
oONB (PB1012-ST) 6 1/4� Dia Harmonic Balancer
Not Included: Carburetor, Starter, Fuel Pump, Distributer, Exhaust, etc.
Contact Information:
Shawn
Phone: (402)469-6797
Email: [email protected]
|
|
|
|
