View Advertiser Index
|
Posted on 2/10/2012 9:03:26 AM
|
Blocks and Parts
350 +060 splayed cap block,9.015 deck heigth,square deck, fresh bore and hone(with torgue plates) Billet splayed caps, cam bore has been redone, stroker clearenced, all bolt holes have been cleaned, oil passages drilled and tapped. $650 firm
350 +060 splayed cap block, fresh bore and hone(with torgue plates) Howards splayed caps, 9.000 deck hieght, oil passages drilled and tapped, stroker clearenced $550
350 +030 4 bolt block,fresh bore and hone,flat deck surface, good line bore, ZERO core shift, $325
(SOLD) 350 2 bolt block, ZERO core shift, virgin block that is perfect canidate for splayed caps. STD bore $200
(2) 350+ 060 4 bolt block,decked, bored and honed, line bored, stroker clearenced, nice centered cam bores $450
350 +030 2 bolt block , clean and ready for assembly $250
400 2 bolt block, fresh line bore,virgin block that will clean at +010, square decked 9.010. main studs $400
400 +030 2 bolt block, fresh line bore, fresh bore and hone, square decked 9.000, oil passages drilled and tapped $400
World products 72cc heads new in the box $400 bare/ complete $650
(NEW) 2 sets 6.125 pro style I-beam rods large journal ARP 8740 rod bolts, wieght 570 grams, $175
JE 391 CI pistons, 4.135 bore(for use with a 6" rod and a 3.625 stroke crank) $275
Mixed set of 412 ci flat top pistons, same weight and compression heigth. 400 +030 use a 3.800 stroke crank and a 6" rod. 11 pistons total part of them are Lunati and the rest are Ross Good way to build cheap backup. $100 or best offer
TRW forged flat top pistons, 350 +030, for a 5.7 rod, $50
BBC forged steel crank, 4.250 stroke. needs cleaned and polished. $200
MISC.....
Carb Specialties/Holley 750 cfm carb, needs base plate $75
Will do some trading on a 4 wheeler or golf cart
Contact Information:
Terry Cohoon
Phone: (712)479-2682 or 712-449-5543
Email: [email protected]
|
|
|
|
