View Advertiser Index
|
Posted on 1/11/2013 8:51:56 PM
|
lots 4 sale no junk
Holley 4412, built by Jdr Performance, NOT gauge legal. USRA stock car legal. Has 1.75 base plate and body has been modified to match this is the type of carb people advertise as 700cfm to 890cfm etc. Used 18 nights since New. $300 I don�t have anything but IMCA 355 motors now, so no use for it.
Eurethane oem type transmission mounts, $5 each used
Longacre splined steering wheel connector, alum with steel weld on splined part, 360 degree ring to release. $40 each have 2 http://www.preciseracing.com/product.cfm?InvKey=18518
SBC Heads � Small port Vortec-Bowtie heads. Part# 25534351. These are GM Performance racing heads, not the thin production OEM Vortec casting. Angle-milled to 54cc. Intake face corrected, head bolt holes all drilled and spot faced to correct them. Fereah hollow stem lw stainless steel valves. Comp Cams double springs. Machined tool steel light weight ten degree locks and steel machined retainers. Guideplates. 7/16" studs. Over $2600 invested, sell for $1500.
For more details see http://www.summitracing.com/parts/nal-25534351/overview/
Matching vortec Edelbrock Performer 2716 aluminum intake. $100.
Used on an IMCA Stockcar motor. 6 nights never hot. Perfect condition just switched motor packages.
NEW Howards LW Solid lifters. Howards #91110. Sbc. 73 grams, that is 25% lighter than conventional. These are made in the USA direct lube lifters with the hole in the bottom. I have only two sets at this price. $300 shipped.
NEW 1999 Monte Carlo nose. Black. $135 from perf bodys. Sell for $125
Eibach 5.5x9.5 front springs. 650 used $20
NEW Eibach 5.5x9.5. 900, new in box $35 each
New hypercoil 5.5 x 9.5. 750lb $35
Hei distributors, complete $25 each 2
Hei distributor no cap rotor pro comp brand like new adv locked out. $25
Accell plug wires. Black high temp ones with separators. $25
Used seats with cover. Have many from NEW never raced to used. $65 to $125
NEW Solid axles 31 spline. 31� and 28-30.5� cut to fit. $55 each
NEW gun drilled 31 spline axles. 29.5� and 31�. $ 90 each
USED 31 spline solid axle 28.5 $50
Comp cams ultra pro magnum full roller rockers, 1.52 ratio, 7/16 studs. Chassis dyno time only. $250 These are part number comp cams 1608-16.
Gooseneck hitch extender\cushioned ride. This goes on your trailer and moves it back 9� to give you more room between the cab and trailer as well as cushion the trailer to truck with the rubber isolaters. You cant feel the trailer riding back there with this in place. Its for the 4.5 square gooseneck. I have pics. $400
New Howards stock diameter valve springs. Electro polished. Howards #98215 with ten degree comp lw machined retainers. Good for .600 lift 7500 rpm. $105 for both.
New Mahle flat top pistons 4.165 bore, 1.00 pin height. NEW with pins $400 will make a 436,377,358 depending on stroke and rod length you use in a 400 block.
750 4 barrel Jdr slick track carb, has billet vac pod for adj secondarys. Ran one night only. $400
14 inch alum air cleaner base with sure seal o ring. $10 each have two both offset style not centered.
14 inch alum steering wheel missing a few of the nubs off the back side. $25
4.75 bolt pattern Used Floater hubs complete with brgs, rotors and lug nuts. Used Ace\winters\prc brand. $200 pair
New 15% reduction krc serpentine lower pulley R Lock. $20 shipped.
Used serpentine krc pulleys 3.5 lower and uppers. 1-1, 2 uppers, 3 lowers. R lock $10 each
Used Krc lower pulley and hub piece that mounts to the balancer. Serpentine. 3.5 not r lock older 2 pin style. $20 both pieces.
9� bilst shocks $75 1030lr bite, 2080lr bite, 3080lr bite
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
