View Advertiser Index
|
Posted on 1/19/2013 5:56:39 PM
|
vortec bowtie heads
$1650 ready to bolt on read info below slowly, these contain some very very good expensive parts these were on my usra open motor. They were better than the rhs cnc by hvh heads I had back to back on the dyno. They were over 40hp better than double humps on the same motor with equal compression.
SBC Heads � Small port Vortec-Bowtie heads. Part# 25534351. These are GM Performance racing heads, not the thin production OEM Vortec casting. Angle-milled to 54cc. Intake face corrected, head bolt holes all drilled and spot faced to correct them. Fereah hollow stem lw stainless steel valves. Comp Cams double with dampner springs. Machined tool steel light weight ten degree locks and steel machined retainers. Adjustable flat guide plates. 7/16" studs. Over $2600 invested, sell for $1500. All parts are 6 total nights old 240 laps or less.
For more details see http://www.summitracing.com/parts/nal-25534351/overview/
Matching vortec Edelbrock Performer 2716 aluminum intake. $100.
Used on an IMCA Stockcar motor. 6 nights never hot. Perfect condition just switched motor packages.
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
