View Advertiser Index
|
Posted on 2/21/2013 1:04:55 AM
|
Parts For Sale
350 +040 4 bolt bored and honed W/torque plates, line bored square decked oil passages drilled and tapped all holes cleaned and deburred $550
350 +060 line bored square decked oil passages drilled and tapped $400
350 +060 2 bolt block bored and honed good line bore surfaced $250
350 +040 2 bolt block bored and honed, good line bore surfaced $250
(2) 350 blocks bare good cam bore N iron caps $150 each
400 block +030 2 bolt bored and honed square decked line bored $300
(NEW) World Products heads, 72cc chambers 180 intake 2.02 int-1.6 exh bare $400
(NEW) EQ heads 200 int 50cc chambers 2.02 int--1.6 exh bare $500
EQ heads 76cc chambers set up for USRA 6 nights on them $600 complete
487 heads crack checked bare $125
391 CI pistons domed $250 (look near new)
use a 3.625 stroke crank 6" rod 400 +010 block
NEW 383 dished speed pro hyperutectic pistons $150
New 6.125 RPM 4340 I-beam rods $250
(6) Lunati 6" 4340 sportsman (streetmaster) rods $75
(7)Scat 4340 6" i-beam rods stock appearing press fit crack checked checked for size $60
(7) Scat 4340 6" i-beam rods bushed crack checked and checked for size $75
4130 lightened 3.480 stroke crank mains std. rods need to be ground $100
cast 350 3.480 crankshafts $25
cast 400 3.750 crankshafts $25
MWMS cam #3 good shape $25 obo
New cam #5273 248--255 @.050 530--550 lift 108LS
degree in at 105 $185
crank pulley and water pump pully serpentine belt style $35 for both
E-85 500 CFM Base Holley then reworked $300
9" Ford gears 543 ratio 31 spline $250
MSD boxes
(1) 6 nights on it $100
(2) app 30 nights works good $40
Mini starters $50
steel bell housing $40
Chevy (flex plates) 153/168 $5 while they last
Chevy flywheel (original) 400 small block $100
(New) external balance plates $4 each while supplies last
Lots of other misc pistons, rods, parts ect...
custom made brackets and and all kinds of tabs
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
