View Advertiser Index
|
Posted on 4/20/2013 10:58:45 PM
|
More parts "grew" in garage...Only need so many
Aluminum sbc water pump with the head line ports. has a 3.5" spacer on front that bolts to the water pump, fan bolts to end of it, neat idea for fast thrash. Double groove alum. upper pully attached yet and 2 fan belts there for size yet althou they are probally good enuff to run. 4 blade fan there too, 100.00 all.
Two complete dist.,one a adjustable MSD, other almost new speedway or ?, housing looks almost like chrome, Billet? Both complete with coil in cap and wires, Taylor and MSD. 100.00 your pick.
Have enuff to make 3 or so air cleanertop and bottom with 4" K+N elements, two have sure seal alum. spacers. 50.00, your pick, you clean'em.
Have one import looking K+N air cleaner, Hose clamps onto 2-3/4" pipe, appears new. 25.00..?
Have 20-5/8" coarse wheel studs, came out of 5" big chevy, lug nuts there too but maybe not all 20. 25.00 all
Have set of hobby stock style motor mounts where bolt goes thru front to rear, use the factory cup on block, have at least one cup, and strenghter that goes in cup.25.00
Have turbo 350 with manual valve body, freshened and dynoed at college,torque convertor too. 350.00 money back..
Have two plastic battery boxes, use something else on this list that fits, I'll UPS to you in one of them.
Have a quick car recall tach, controls in face of tach, not remote..25.00, money back
Have a oilpress, water temp, gauge panel with warning lights,woven oil line, seperate switch panel can go along. 25.00
Have big battery cable from battery behind driver to Ford solonoid on firewall, that and any other wiring can go with gauges above...25.00 seperate
Stock mount street stock shocks, 2 rear, Pro #SS201, One rear Afco #1031, one #1035, one Front Afco 1021, one rear Bilstien #AK1044 Plus one other rear Afco I haven't found number on yet. All cycle OK, about what I know..All 7 for 25.00, not sure I can get them all in battery box but can try..
KRC floor mount alum, powerglide shifter, movable allen bolts as detents, heim ended rod too...25.00.
Several alum seats, no covers or ratty ones, Kitchen chair pads work pretty nice, 25.00 choice, cheaper by more.
Three Weld racing alum. mud plug, Dzus fastn into recievers that clamp between beadlock ring and wheel. 15.00 each, cheaper by more...
Wheels, 4-2" off, Bassett Inertia, powder coat, 4.75" pattern. 15.00 each, again cheaper by more, not perfect but usable yet.
Chrome Bassett D pattern and Chrome Inertia, 25.00 each. 4.7/5" bolt pattern.
Calls are best, Daughter speaks good computor, me not so much, Thanks for looking..... In Norfolk, Nebr.
Contact Information:
Dale Primrose Jr.
Phone: (402)371-1333 (402) 841-1212
Email: [email protected]
|
|
|
|
