View Advertiser Index
|
Posted on 9/1/2013 6:25:49 PM
|
IMCA stock car sell out
NEW 2013 Jdr Performance 4412 500 cfm IMCA gauge legal holley. $450
Kn flow control air cleaner wrap, this is what you rivet on the base and it goes around the front to deflect the fan air from disturbing your intake air. NEW$40
Aluminum air cleaner base and tops. $10 each have cenetered, and offset.
5.5x9.5 springs $20 each actual rates in my spring rater 900/880/800/750/720
Bilstien shocks by fx new builds or used one night. 9�6010/4010/5050/6040 7� 8060/8040/6060/ $90 each
Lead in 50 lb valve cover and 25# half valve cover pieces, also have some sheet if you want to melt your own. Also have two 65 lb pieces in 2x3 tubing. All drilled already! $1.00 a lb. Have at least 1000 lbs
Bushore powerglide direct drive, all options from bushore, alum lightened drum, etc. MAX lightweight. 18 nights, never any issues works great. $500 cost $980 from Bushore.683,666,650,633 3rd member cut to the max lightened ring gear and lightened short narrow yoke, full lw spool. Used $475 in tote each.
Powerglide crank flange and coupler tube. Old style non crate. $100 each
Metric rotor new in box. $40
Metric rotor new trailer worn with brgs and brg spacer installed already for reduced side load on rf. Has 4 inch long studs installed. $60
Metric spindles $50 each
Metric spindles $65 each already reamed for larger lower bj and spindle saver welded on the bottom side.
52.5 metric stock car 2 inch drive shaft, NEW trailer carried spares, fastshafts. $150 each with yoke
51 inch 3 inch hobby stock drive shaft used, good joints, yokes etc. $50
Comp cams pro series rockers, used 2 nights. 3\8 studs. $365 new $225 here!!
Edelbrock imca spec intake used 2701 eps intake. $100
Alum tall valve covers, new in box. $50
Alum tall valve covers used. $40
700 3rd member cut to the max lightened ring gear and lightened short narrow yoke, full lw spool. 1 night on it. $550 in tote.
714 3rd member cut to the max lightened ring gear and lightened short narrow yoke, full lw spool. 1 night on it. $550 in tote.
12.7 to 1 steering box. NEW. Fastest legal hobby stock box. $175
487x heads, milled to 65.5cc, fereah hollow valves, isky tool room springs, comp tool steel light weight retainers, arp studs. The best parts you can buy. $750 complete raced 2 nights since fresh and new springs retainers.
Bare sand blasted metric frame straight and ready to build $300
99 pontiac grand prix body, roof quarters already removed, includes front fenders. $600
Steel hand made 99 Pontiac doors $70 each
Aluminum hoods for stock cars, big enough to be trimmed for new or old body style, have nice body lines, these are off full size cars from the 90s. $140 each
567/620 3rd members. Used in great shape, lightened cut ring gear, lw full spool. Short narrow yokes. $450 in tote.
Used IMCA hoosiers, 1-3 nights on them. $50 each all measure 5.5 32nds or more tread depth. All are freshly ground and sized.
NEW r2c performance cleanable air cleaners. 4x14. These are the sportsman series, replace wix, napa etc. $50 each
Holley 4 barrel to 4412 two barrel carb adapter, new all phenolic insulating type. Bottom has been custom radiused. NEW $35.00
New custom cut camshaft. stock car sportmod hobby. I bought these is bulk to get a discount. $200
15 inch alum steering wheel with black grip material on it. Longacre brand I think. $25 used
New 11.75 speedway .810 rear rotors. $20 each
4.75 bolt pattern Used Floater hubs complete with brgs, rotors and lug nuts. Used Ace\winters\prc brand. $200 pair
NEW Longacre lw alum splined steering wheel quick release.. This is the 360 degree release type. $40 splined part is cut off shaft, never raced, just welded on and cut off later. http://www.longacreracing.com/catalog/item.asp?id=509&catid=15
New sbc valve springs 1.46 diameter 130/350#. NEW in box with ten degree new comp cams steel retainers and new locks. $95 all.
Eurethane oem type transmission mounts, $5 each used
vortec Edelbrock Performer #2716 aluminum intake, IMCA spec intake. $100.
New Mr Gasket cork and rubber vortec valve cover gaskets. These are great to clue to the valve cover! $5 a set. I have two new sets
New sbc solid lifters $60
Accell plug wires. Hei 90 degree boots on ends. Black high temp ones with separators. $25
Used seats with cover. Have many NEW and used. $50 to $125
Used sbc custom cam and lifter. Oiling lifters. $75 good stock car, sportmod, hobby stock cam
NEW Solid axles 31 spline. 31� and 28-30.5� cut to fit. $55 each
NEW gun drilled 31 spline axles. 29.5� and 31�. $ 90 each
Used solid 31 spline axle 32.5 $50 grand national tapered type
USED 31 spline solid axle 28.5 qty2 $50 grand national tapered type
Gooseneck hitch extender\cushioned ride. This goes on your trailer and moves it back 9� to give you more room between the cab and trailer as well as cushion the trailer to truck with the rubber isolaters. Used for a short bed truck to gain more cab room. Isolators cushion the ride so you cant feel the trailer riding back there with this in place. Its for the 4.5 square gooseneck. I have pics. $400
14 inch alum air cleaner base with sure seal o ring. $10 each have two both offset style not centered. Both have sure seal spacer on them also.
New 15% reduction krc serpentine lower pulley R Lock. $20 .
1 inch carb spacer like hvh super sucker used. $50
Master disconnect switch for battery. $10 each have 2
On off switch panel with toggle and push button and light, rebco brand. $10
Bsb double sided pinion mount for ford nine inch. $50
Chevelle lower a arms bare, NEW widen track each side. $120 pair
Fan spacer like new with bolts 2 inch $5
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
