View Advertiser Index
|
Posted on 2/15/2014 5:46:07 PM
|
Extra parts for sale, Smart racers carry spares
Aluminum sbc water pump with head line ports, 3.5" spacer on front that bolts to water pump, fan bolts to it. Good for fast thrash, Two groove up. pully bolted on and 2 fan belts there for size and good enuff to run. 4 blade fan there loose...100.00 for all of it.
20-5/8" coarse studs, lug nuts too...20.00
Hobby stock motor mounts where bolt goes thru front to rear, new or close. have one cup that goes on motor and one strenghter for in it....25.00
7 Stock mount shocks, ran on street stock last, 2 rear Pro#SS201, Afco #1031, Afco#1035, Bilstein #AK1044, Rear Afco I can't find # on, plus one Afco front#1021 25.00 for all
KRC floor mount shifter with the allen head screws to use as detent, Heim ended rod is there too. 25.00
Handful of Aluminum seats, some have covers, 25.00 up to ?, cheaper by the load....
Three Weld Alum. beadlock mudplugs, Dzus fasten into ring that clamps between ring and wheel. 15.00 apiece.
Bassett Inertia wheels, 4-3/4" pattern 2" offset. not perfect but usable yet, 15.00 apiece, roller tires on yet.
Two plastic battery boxes, free with any other purchase, storing parts in them now...
10 or so Pro-am tires, on 4-3/4" wheels, various offset and styles,buy the wheel, get the tire. 20.00 and up.
Floater rearend, Metric mounts look ruff, Rotors, hubs and brake mounts are there...200.00
Clean older Quadrajet, #10 AN inlet, uses vac. on rear doors, #7043234-3122, H rear hanger, if your rules are afraid of these, they can be screamers...75.00
2-4412's, 4412-3 1809 on air horn of one I have ran,#10 AN inlet, mounted on alum. slider with burred underside, Other is same, Holley Perf. tag on it.200.00 choice w/ plate.
Pair alum. water pump pullies, one for short, one for long,Crank 5.5" across, pump 6.5" 25.00 either pair
8 chrome water fire extingishers, refillable, ones we have have been flawless, weekly refilled, 65.00 each or 120.00 for 4.
Pair-cast iron exh. manifolds with short pipes on, rear discharge and semi rear, cleaned up alittle inside,50.00 the pair.
Schoenfeld step headers, new, not metric as comes down to close to center, crossmember there on metric.
Sbc? headers with round head holes, your guess good as mine.
Set of headers with "nova" markered on them...25.00 any,gamble that you can make fit or use
3 Alum. steering wheels, 15" black rubber,3"dish..14" all Alumn.1.5" dish, 13" all Alumn. flat...25.00 choice.
Alum. panhard bracket for 9", 3 tapped holes off to one side..25.00
Sweet P530A, looks like block mount for power steer with two arms coming off with tapped ends, Alum...25.00
5 small block Alum intakes, Torker, Performer, Factory with Dualjet carb on, 50.00 choice
Cast Iron holley pattern intake, 300 hp corvette?? 50.00
Cast Iron spreadbore pattern, 50.00 or ?
Have had most of this awhile and would rather someone use than continue to sit, calls are how we need to handle and I'll help as I can.......
Contact Information:
Dale Primrose Jr. Co-Owner of Team 12
Phone: (402)371-1333 (402)841-1212 cell
Email: [email protected]
|
|
|
|
