View Advertiser Index
|
Posted on 3/17/2014 9:07:47 AM
|
Updated list
(2)IMCA stock car motors 360 4 bolt block square decked/ with plates line bored Scat Mahle fully balanced EQ heads $5500
350 +030 2 bolt studded block speed pro H631 hyp pistons gm crank and rods new rings and bearings heads choice of 3 cams really nice buget motor $1200
350 splayed cap blocks 1 left +060 they dont get any cheaper than this $500
350(std bore)4 bolt block decked to 9.010 not yet bored and honed will finish to your size $500
1 left) Stock type rotating assembly fresh ground 20/20 stock crank reconditioned 5.7 rods/w good bolts sivolite +060 utectic pistons comes with bearings and rings $400
JE 390ci (job # 637806) Chevy pistons forged domed 4.135 bore 1.187 c.h. (use 3.625 stroke/6" rod).043/.043/3mm 470grams 2nd poss combo is (349ci)=(3.250 stroke 6.200 rod) very little use $300
Ross 390ci (4032) (#7312) forged flat top 4.135 bore 4.190c.h. 3.625 stroke 5.7 rod or use a (5.850 rod and a 3.335 stroke to make a 358ci)very little use $400
KB #114 350 +060 hyperutectic pistons big domed for a 6" rod $200 really nice shape
New pro comp 6" stock type bushed cap screw $125
New EQ imca heads complete $1350
Bowtie heads complete $650
487 heads fresh surface, 2.02 intake and 1.6 exhaust new guides new valves new retainers and springs(600) lift screw in studs/guide plates complete $650
487 heads fresh valve job 2.02 int 1.6 exh. $450
441 heads ported and pressure checked $150
Lots of new parts in stock CALL
oil pumps timing chains gaskets valves and springs rods pistons
Lots of good used misc parts CALL
reground cranks used cams good used rods and pistons
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
