View Advertiser Index
|
Posted on 3/19/2014 10:21:19 AM
|
Parts For Sale/Wanted
(1)IMCA stock car motor 360 4 bolt block square decked/ with plates line bored Scat Mahle fully balanced EQ heads $5500
350 +030 2 bolt studded block speed pro H631 hyp pistons gm crank and rods new rings and bearings heads choice of 3 cams really nice buget motor $1200
350 splayed cap blocks 1 left +060 they dont get any cheaper than this $500
1 left) Stock type rotating assembly fresh ground 20/20 stock crank reconditioned 5.7 rods/w good bolts sivolite +060 utectic pistons comes with bearings and rings $300
JE 390ci (job # 637806) Chevy pistons forged domed 4.135 bore 1.187 c.h. (use 3.625 stroke/6" rod).043/.043/3mm 470grams 2nd poss combo is (349ci)=(3.250 stroke 6.200 rod) very little use $300
Ross 390ci (4032) (#7312) forged flat top 4.135 bore 4.190c.h. 3.625 stroke 5.7 rod or use a (5.850 rod and a 3.335 stroke to make a 358ci)very little use $400
KB #114 350 +060 hyperutectic pistons big domed for a 6" rod $200 really nice shape
New pro comp 6" stock type bushed cap screw $125
New EQ imca heads competition back cut valves 10 degree retainers and locks 600 lift springs complete $1350
Bowtie heads complete $650
487 heads fresh surface, 2.02 intake and 1.6 exhaust new guides new valves new retainers and springs(600) lift screw in studs/guide plates complete $650
487 heads fresh valve job screw in studs and guide plates new 600 lift springs and locks $550
383 crank 4340 gun drilled $350
Lots of new parts in stock CALL
oil pumps timing chains gaskets valves and springs rods pistons scorpion roller rocker arms
Lots of good used misc parts CALL
reground cranks used cams good used rods and pistons valve covers rocker arms
Wanted
383 flat top forged pistons must be for a 5.7 rod (1.425-1.433)compression hieght.. dont care what ring package it has call
looking for an old offenhouser intake manifold catolog or booklet
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
