View Advertiser Index
|
Posted on 4/10/2014 8:16:45 AM
|
Parts
360ci Imca stock car motor 350+060 4 bolt block ARP maim studs line bored, square decked to 9.010 Mahle pistons 6" Scat rods Gm crank fresh grind 20/20 with large radious balanced EQ heads that are cut down new cam edm lifters isky springs 10 degree locks and retainers back cut performance valves melling cnc oil pump kevko pan ( more than listed) $5500
400 block +040 2 bolt main 8.985 deck hieght $200
350+060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded $350
393ci 400+030 domed pistons 4340 crank(3 5/8 stroke) 6"H-beam rods complete motor $5000 OBO
406ci forged flat tops 6" H-beam rods light weight 4340 crank 49cc heads complete 4000 OBO
JE 390ci small block chevy domed pistons $300
Ross 390ci small block chevy flat top $400
KB #114 350 +060 hyp $200
New pro comp 6" stock type bushed cap screw $125
New EQ imca bare heads $290 each
487 heads fresh surface new 2.02 int 1.6 exh valves springs $500
487 heads 2.02 int 1.6 exh hardened exh seats surfaced $350
441 heads 2.02 int 1.6 exh slight port work $250
441 heads stock bare and crack checked $150
NEW Bullet cam 239/239 507/507 hydr. $140
NEW Rhoads lifters 8178x (anti pump up) $125
New springs for cam above $60
Above 3 items for $275
#8 cam and lifters $50
Wanted
383 flat top forged pistons must be for a 5.7 rod (1.425-1.433)compression hieght..
Looking for a 1938 chevy pickup.
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
