View Advertiser Index
|
Posted on 6/7/2014 11:14:21 AM
|
Parts/ Wanted
400 block +040 2 bolt main 8.985 deck hieght $200
350 +060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded $350
350 +060 4 bolt block line bored square decked bored and honed with plates $550
360 ci balanced rotating assembly Mahle pistons and rings, 6" Scat rods,Gm reground crank ACL bearings $1300
JE 390ci small block chevy domed pistons $300
KB #114 350 +060 hyp $200
NEW 350 +060 silvolite cast pistons $60
(7)TRW/Speed pro L-2477 (400 +020) forged domed pistons $175
New pro comp 6" stock type bushed cap screw $125
Eagle 6" press fit recond $100
GM reconditioned stock rods $100
Scat pro stock I-beam rods (one rod needs a bushing replaced) $175
New set of 6" polished beam rods (street use) not sure of the brand $75
(6) 6" H-beam rods $60
Misc odds and end rods all rods are magged $10
383-- 4340 gun drilled and lightned crank fresh grind
( checked for straightness and magged) $400
GM cast 350 cranks $35
NEW Scorpion Roller rockers spc1000
$235
NEW EQ 350I heads in the box $290 each
487 heads 2.02 int 1.6 exh hardened exh seats surfaced bare $300
441 heads 2.02 int 1.6 exh slight port work bare $200
882 heads 1.94/1.5 fresh valve job complete $150
NEW Bullet cam 239/239 507/507 hydr. $140
NEW Rhoads lifters 8178x (anti pump up) $125
New springs for cam above $60
Above 3 items for $275
Kevko modified kickout pan 7 1/4 deep $60
claimer kickout 7 1/4 deep $40
stock type claimer pans $20
If you need single bearing or rings call me, as I have lots of misc on the shelf
If you dont see what your looking for call I might have it some where
Wanted 4 wheeler or golf cart nothing special just needs to run will do some trading on parts
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
