View Advertiser Index
|
Posted on 1/11/2015 6:33:13 PM
|
Updated Parts List
350 +060 4 bolt short block (no cam) NEW Mahle pistons NEW Scat rods Gm fresh ground crank block is decked bored and honed with plates line bored file fit rings acl bearings fully balanced $1800 Can make it complete $4300...
*350 block +040 2 bolt block Arp main studs 9.015 deck height $350...
*350 +060 2 bolt block 9.00 deck hieght fresh bore and hone with deck plates mains are studded cam bearings installed oil passages drilled and tapped $350...
*391 ci (400 +010) domed pistons for use with 6" rods and a 3.625 stroke crank like new $300 firm...
*391 ci (400+010) flat top pistons use 5.7rod and 3.625 stroke like new $350 firm...
*Keith Black hyper #114 pistons has 388 dome makes a 6"-360 $ 200
*New 350+ 030 cast domed pistons $10...
*GM reconditioned 5.7 rods $75...
*383-- 4340 gun drilled and lightned crank fresh grind
( checked for straightness and magged) $400...
*NEW EQ heads cut for stock car have been cc checked $680 bare or $1200 complete...
*(1)NEW edelbrock alum head RPM #6061 $300...
* GM 041 casting heads K-12-9 date bare never raced will need rebuilt hard to find $400...
*GM bow-tie heads (this set is not ported) you can buy them with or with out valves and springs $550 bare.. or $650...
*Cams new and used $25-$175
*NEW Super Trapp mufflers $100...
*100 lb regular propane tank has hose with it $75...
*350 turbo trans was good working trans when pulled $100...
*Alum Aux tank 5' long x 25" wide x 18" deep app 98 gal has GM sending unit in it and is baffled angled filler neck flat top and rounded bottom has cradle that it sets in. outlet ports on bottom tig welded nice tank $100...
I have more than listed here so if you need something call
Wanted
2 h631cp speed pro pistons +030
1 eagle 6" press fit cap screw rod
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
