View Advertiser Index
|
Posted on 2/9/2015 10:25:29 PM
|
Parts For Sale
*350+060 4 bolt rotating assembly in block Bored and honed with deck plates line bored and square decked GM fresh ground crank Scat 6" rods Mahle flat top pistons Acl bearings file fit rings balanced ..$1800
*350+030 2 bolt block $300
*400+030 2 bolt block good bore and line bore fresh decking... $300
*400-std should clean at .010 line bored square decked does have outside starter hole issue but can be fixed...$250
*391 ci (400 +010) domed pistons for use with 6" rods and a 3.625 stroke crank like new $300 firm...
*391 ci (400+010) flat top pistons use 5.7rod and 3.625 stroke like new $350 firm...
*Keith Black hyper #114 pistons has 388 dome makes a 6"-360 $200
*GM reconditioned 5.7 rods $75...
*383-- 4340 gun drilled and lightned crank fresh grind
( checked for straightness and magged) $400...
*NEW EQ heads bare call for pricing
*NEW EQ heads complete for stock car 64cc ...$1200
*(1)NEW edelbrock alum head RPM #6061 $300...
* GM 041 casting heads K-12-9 date bare never raced will need rebuilt hard to find $400...
*GM bow-tie heads (this set is not ported) you can buy them with or with out valves and springs $550 bare.. or $650...
*NEW Super Trapp mufflers $100...
*100 lb regular propane tank has hose with it $75...
*350 turbo trans was good working trans when pulled $100...
*Alum Aux tank 5' long x 25" wide x 18" deep app 98 gal has GM sending unit in it and is baffled angled filler neck flat top and rounded bottom has cradle that it sets in. outlet ports on bottom tig welded nice tank $100...
I have more than listed here so if you need something call
Wanted
2 h631cp speed pro pistons +030
1 eagle 6" press fit cap screw rod
1 Speed Pro/TRW/Manley flat top forged piston For use with a 400 +030--5.7 rod-- 3.750 stroke
Contact Information:
Terry Cohoon
Phone: (712)449-5543
Email: [email protected]
|
|
|
|
