 View Advertiser Index
|
Posted on 11/9/2007
|
Parts and more for sale
Wiseco pistons,370ci (6021A3) 350 +030 domed piston uses a 6" rods and a 3.625 stroke $225
New TRW forged domed pistons. 360ci L2510/L2509 uses 6" rods and a 3.480 stroke crank. $400 last set left.
New Kieth Black hyperutectic flat top pistons, 358ci uses 6" rods and a 3.480 stroke $225
gm reconditioned rods $75
400 block, prebored to 4.180, square decked and line bored with main studs. Has bottom 1" hard blocked. oil passages drilled, coolant passages opened up. With all the machine work done to this block it normally sells for $700. But it has some slight shadows that didnt clean in the cylinders.So I will sell it for $500
400 block, pre bored to 4.160 decked and line bored. oil passages drilled $500
triple disk clutch setup, used 1 season. not burnt up.$275
882 casting heads for sale, complete and ready to bolt on, new valves 1.94/1.5, surfaced, new springs,new guides, $300
291 heads complete $250 461 heads angle milled not sure how much $75 290 heads, complete $250
Turbo 400 trans, used but good shape, $150 Ford 3 speed top loader $75
hobby stock manifolds $5 each
Metal shop cabinets that hang on the wall, $100 each
Various sizes of heater hose (whole lot) for $30
buckets full of bolts (mostly motor bolts) $5 each
Contact Information:
Terry Cohoon Phone: (712)289-2211 or 712-363-0996 Email: [email protected]
|
|
|
|