View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
Wesico pistons, 400+.030 uses 6" rods $350
Speed pro 400 +060 domed pistons, $50
360 CI rotating assembly, Speed pro pistons H113cp, Scat I beams rods,Gm cast crank $500
SRP forged 6" pistons, only have 6 of these, $100
NEW wrist pins, several sets, $80
Eagle 4340 crank, 3.500 stroke rods std., mains 010 $375
GM steel crank fresh regrind, crack checked, .020/.020 $200
GM 327 steel cranks $100
GM cast cranks $10
350 +060, block freshly cleaned and pressure checked, $250
350 block +040,, $400
400 block, prebored to 4.180, square decked and line bored with main studs. Has bottom 1" hard blocked. oil passages drilled, coolant passages opened up. With all the machine work done to this block it normally sells for $700. But it has some slight shadows that didnt clean in the cylinders. So I will sell it for $300
Other blocks avalible, all blocks and heads gauranteed
Q-jet intakes $20
2 barrell, intakes $35
intakes cleaned and crack checked, $50
487 heads, new 2.02int. valves new 1.6 exh. valves,bronz guides, pinned studs, surfaced ready top bolt on $500
991 head cores $50pr.
186 heads $100
Turbo 400 trans, used but good shape, $150
flywheels - $8 each
New stock diameter valve spring retainers $10 a set while they last
I have several broken sets of rings, I will sell rings for just one cylinder if that is what you need or just let me know. I have STd, 010,020,025,030,035,040,060, in both 350 and 400
Contact Information:
Terry Cohoon
Phone: (712)283-2283
Email: [email protected]
|
|
|
|
