View Advertiser Index
|
Posted on 11/9/2007
|
ENGINES/ PARTS FOR SALE
377 ENGINE
ALIGN HONED
DECKEDPLATE HONED
SQUARE DECKED
FULLY BALANCED
SPLAYED STEEL CAPS.
GIRDLE ON REAR MAIN.
4340 LW EAGLE CRANKSHAFT
4340 LW EAGLE 6.0 H-BEAMS C0NNECTING RODS W 7/16 ROD BOLTS
ROSS 13.8 PISTONS
8 QU. 6 GATE CRANKSCRAPER, WINDAGE TRAY OIL PAN
IRON EAGLE 215 CC. CYLINDER HEADS WITH 7/16 STUDS
ATI SUPER DAMPER BALANCER
COMP ROLLER CAMSHAFT
CRANE STEEL ROLLER TAPPETS WITH HORIZONTAL LOCKING BAR
COMP ROLLER ROCKERS
STUD GIRDLE
SUPER VICTOR INTAKE
BRODIX ALUMINIM VALVE COVERS.
Engine was on dyno 546 hp 519 ft/lbs. torque have dyno sheets
PRICE; $6000.00/firm
383 PTM motor 8 nights balanced stock rod, stock crank, world head 2.02/1.6 200 runners, 64cc angle plug 4 bl. Intake
$1500
350 shortblock
Rods- 6� scat pro series 4340 7/16 bolt
Pistons- H104CP .240 dome
Crank- GM steel 1148
Cam- Isky 547B
Pan- claimer race pan
$1000
1bbc bare 4 bolt main needs sleeve
$25
1-set Dart iron eagle heads 215 runners 2.050/1.600 valves 64cc good springs for roller cam strait plug
$575
1-set Dart iron eagle heads 215 runners 2.050/1.600 valves 64cc big springs for solid lifter cam strait plug
$575
1-set Dart iron eagle heads 215 runners 2.050/1.600 valves 64cc small springs angle plug
$575
take-offs
2 sets 441
2 sets 487
2 sets 993
1set bbc oval port
$50/set
have many other #�s of heads good for hobby stocks
$25/set
Set of Scorpion Alum.1.5 roller rockers $150
3/8 stud w/ polylock only ran one night
Set of Crower 1.6 $175
roller rockers 7/16 stud
Set of 1.5 alum. roller $135
rockers 3/8 stud like new
11- partial set of alum roller $50
rockers 1.5 3/8 stud
10- L2304 TRW forged .030 pistons $75
on GM rod w/ good bolts
6- 6� wheeler rods $55
7- L3022F TRW forged .030 on GM rods $35
1-set of GM polished rods $20
6-H104 CP on 6� wheeler rods .030 $40
1-set new TRW 3024 .020 $50
1-edelbrock performer #2101 $55
no porting
1-edelbrock #2999 1� extra tall $75
no porting
1- victor jr never ran just bolted $90
on no porting #2975
1- super victor like new #2925 $75
no porting
1-victor jr no porting #2970 $75
1- team g #7530 $35
have had some porting done
has had been welded up
in corner but not into any water
1- alum. imca stamped stock car $40
intake
4-Kevco 8qt.with k/o modified oil pan $65
1-Kevco double kick out w/ $125
crank scraper & windage tray
3- 1� thick alum. spacers for sbc $5/each
intake
2- sure seal air cleaner $5/each
spacers �� tall never used
19� 6 blade fan (steel) like new $10
1-Willy�s stage II IMCA legal 350 cfm $700
carb ran 2 nights
Contact Information:
Jed or Tim Bengard
Phone: (712)268-2746 or (712)-268-2745
Email: [email protected]
Contact Information:
Jed or Tim Bengard
Phone: 71226827467122682745
Email: [email protected]
|
|
|
|
