View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
Wiseco 400 + 030 forged domed pistons, these are for a 6" rod and a 3.750 stroke. $350
JE 15 degree flat top pistons, 4.151 bore, 1.186 com hght, use a 6" rod and a 3.625 stroke crank for 393ci. $250
TRW forged pistons,350 + 030 flat tops mounted on 5.7 rods with good bolts. $250
Eagle 4340 crank, 3500 stroke, $300
2-GM steel cranks, both are 10/10, $100 each
350 blocks, 4 bolt and 2 bolt, $100
350 4 bolt block , bored +060 but not honed yet, line bored , square decked,oil passages drilled, $500 will hone to fit your pistons.
487 casting heads, cleaned and checked, surfaced, new guides. 2.02 int, 1.6 exh, new springs, retainers and locks, bronz guides, pinned studs,$550
882 castings, surfaced, cut for 2.05 int and 1.6 exh. cut for screw in studs and guide plates,bronz guides,hardened seatsm no port work $200
1(new) Edelbrock RPM alumanium head, Part #6061 bare $400
set of 291 casting heads, complete stock ready to bolt on ,been setting on the shelf, $200
New Guide Plates, $10 a set
New 7/16 screw in studs, $15 set
New ARP cam lock bolts, $5 pkg
New JE wrist pins, part #927-2.750-15-51S, 130 grams, $100
New Diamond wrist pins,927-2.850 tappered ends,140 grams$75
583 gears used good shape 28 or 31 spline $225
valve guide knurling set, everything is there. $75
Misc stuff
Redi heater uses kerosene $50 like new
turbo 400 trans, good shape $75
4.3 litre V-6, rebuilt short block, non roller cam, $500 or if you assemble it $300
Contact Information:
Terry Cohoon
Phone: (712)-479-2398
Email: [email protected]
|
|
|
|
