View Advertiser Index
|
Posted on 11/9/2007
|
motors, pistons, rods, clutches,scattershield
aluminum scale trays adjustable to level them up $75.00
lw alternator and mounts pulleys for serpentine etc. used 14 nights, imca made illegal. speedway part number 910-68120 $ 150
double hump head cores,041,186,462,461 $150 a set
stock type clutch set up, custom built, steel flywheel, all steel clutch, solid disc with metalic friction pads, full 360* disk, should last a lifetime. total wt 37lbs. $200
viper 7 inch single disc 7 lbs all alum, needs pad, I have the builders contact info he built this one for me, with extra clamping force, dual diaphragm. $100.00 pads are 75-100 installed.
viper 7.25 inch same as above but only ran at Beatrice one race. $250.00
Lakewood Scattershield, lightened anywhere possible, bottom cut off to 270 degrees coverage,under 20 lbs!! $150.00
non IMCA 15x8 black wheel 5x5 2 inch backspace $20.00
305 out of 80 camaro, 98,000 miles no intake manifold on it, no smoke ran great. $95.00
steel saginaw ps pump with large alum v belt race pulley, uses remote reservoir $50.00
one brake floater for metric caliper. $5.00
one head mount ps pump mount $5.00
4 hole plastic 1 inch spacers $5.00
alum 4 barrel to 2 barrel carb adapters $5.00 each mr gasket\td etc.
weind stealth intake manifold $75.00
Gm cast iron high rise, often called bowtie intake $100.00
75 nova no motor no trans good body $125.00
77 nova same as above one dent in quarter $100.00
nova skins all off a car, straight no roof. $100 all
Nova stock car chassis, IMCA legal, pro am legal, very light weight, main cage is dom tubing, straight chassis only about 45 nights on it, I built it new july 2004. Would be a great crate motor car, 2740 race ready minus lead and driver, raceable percentages at 3100 easy. $ 500.00
350 4 bolt block, straight main line $150
350 2 bolt block, straight main line $100
350 stock crank std std $50
406 4.155 pistons,stock rods. Keith Black #127, .100 dome. 10 nights, balanced. $250.00
406 4.155 Keith Black #125 Flat top (partial set 6)stock rods with ARP bolts. $75.00
383 4.030 pistons\Rods. Keith Black #111,.100 dome,rods are polished x rods,have childs albert dura moly rings on them, 2 nights old. $250.00
383 4.00 Ross Flat top pistons. (6 used 2 new) 5.7 rod. with pin & locks $200.00
NEW Ross FT 4.00 bore\5.7 rod\3.8 stroke. custom pistons, with pins & locks $350.00
1. NEW not assembled, 406 .030. kb claimer lw pistons flat top. aftermarket 5140 rods,stock crank,double hump 461 heads. ss valves. all balanced,claimer pan, pick up, valve covers included and choice of a couple diff cams.
2. NEW assembled 406 .030 je used cup pistons .100 dome, lw metric rings,gm powder metal 6 in rods, stock crank, balanced,vortec heads, ss ferea valves etc. heads are drilled for old intake pattern. custom cam.
3. 383 6 nights. scat crank,scat 6 in rods,wiseco large dome pro tru pistons, pro heads, internally balanced, race pan. Lunati cam.
2000.00 each
All have good roller tip rockers, good cast iron intakes, hardened pushrods, screw in studs and guide plates.
"040" Gm 64cc heads, no humps on front from factory,look like smog heads, 1.94\1.5 manley race flo undercut lw valves, 10 degree locks,kmotion springs,ran 5 nights and rebuilt. All new seats in both heads. $400.00 Ready to Bolt on. screw in studs plates
Contact Information:
Jeff J.
Phone: (712)566-9142
Email: [email protected]
|
|
|
|
