View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
350 block, 4 bolt, square decked,line bored, bored +060 oil passages drilled and tapped, all oil holes debured, all threaded holes have had thread cleaner run through them. all tha casting slag has been removed from lifter valley area. Will hone to fit your pistons,Super nice block, $600
350 4 bolt block, +060, bored but not yet honed, Line bored,clearenced for stroker crank, oil passages drilled and tapped, all the holes have had tread cleaner run through them.good straight deck surface,all the casting slag has been removed for lifter area, will hone to fit your pistons, Nice block $400
400 block, 2 bolt block fresh +040 bore, not yet honed, straight line bore, oil passages drilled and tapped $300
461 double hump heads ready to bolt on $300
World products heads, SR torguers, used but good shape, $400
Edelbrock Performer intake, good shape, $50
383 balance plates $9 shipped
Guide plates flat type, $10 set
Valve retainers, hardened $10 set
1 set of double springs/ w damper, 1.450 diameter, for big flat tappet cam, comes with 10* locks, hardened retainers and bottom spring cups. $75
1 set of Manley 2.055 SS intake valves, 100 long, undercut stem, single grove $50
1 set of Manley SS exhaust valves,1.6, 100 long, undercut stem single grove, $50
New pr. of copper head gaskets, .060 thick $100
Engine seal kits, seals up that motor for storage or transportation, $25
1 2 barrell intake that is cleaned and crack checked, it has been square surfaced, $35
2- 16"X8, white spoke 8 bolt wheels, $25
Turbo 400 tranny, used works good $75
Pull bar brackets, pan hard bar brakets, disc brake brackets, shock tabs, gussets, J bar brackets, all kinds of tabs and other brackets for sale
I have lots of good new and used parts on hand, call if you need something special.
Contact Information:
Terry Cohoon
Phone: (712)479-2251
Email: [email protected]
|
|
|
|
