View Advertiser Index
|
Posted on 11/9/2007
|
2002 Terminator Chassis I-Stock $3700 Roller!!!!!!
2002 Terminator Chassis updated to a Stock car in 2005.
I originally built the car as a hobby stock and raced it as such for 3 years. I then took the car back to Terminator Chassis and had the weight jack, and shock mounts put on in 2005. The car was one of the underslung cars and I still have the underslung bars and they will go with and can be welded back on. 2002 was the first year of the bolt-on front end and bolt-on passenger door bar. The only bar that has ever been replaced is the passenger bolt-on door bar, and the car has never had a serious wreck or been bent at all. I have taken excellent care of this car, and it has always been maintained. It will have approx. 100 shows on it by the end of this season, which some guys have in a year or two. It has an 84� Cutlass body with an old style Monte SS tailpiece, and a 2005 style Monte SS nosepiece. Let me know how you would like the car, as I will sell it in almost any configuration.
It has a Kirkey Intermediate seat, Simpson Platinum CAMLOCK belts (new this spring $240.), Autometer ultra light gauges wt, op, 5� tach w/recall, brake gauges, switches. Dry cell battery w/disconnect switch. If you want it �Turn Key� with the motor, powerglide, all you need to do is put your gears in and go Racing�. $6600.
As a roller�. $3700. All you need is motor, tranny, gear and you�re racing.
Below is a list of the parts that were new as of 2005
Winters Floater rear end, Front Rotors/bearings, IMCA Tubular upper control arms/ball joints, Front �swivler� weight jacks, Rear weight jacks, New metal firewall as per IMCA rules, cowl style dash with trap doors and bead-rolled flames, Afco Radiator/Shrouds, 16 Gal fuel cell, AN style Fuel filter, Springs, Shocks, Aluminum mid plate, powerglide shifter/linkage, Wilwood brake pedals/master cylinders, all metal brake lines, Brake Gauges/adjuster, Howe Quiksteer, Block mount steering pump w/remote reservoir and lines, Schoenfeld Headers, Tubular front bumper, window net, all wiring.
After the car is sold, I will have the following parts for sale depending how it sells������
JR Motorsports 383 c.i Complete- Scat crank/rods, dome pistons, World Products heads, JR cam, Complete pan to intake. $1800.
2 Powerglide Racing Tranny's- Built by Autotransmatic-Roger Hadan- One complete with coupler and lines/ball valve. $450. The other one is Fresh(Still sitting at the tranny shop) $350. $750. for the both with all parts
Holley 350 cfm IMCA carb- Keith Dorton works good. $225.
Flow Design adapter- Great adapter for IMCA Stock $65.
Holley Racing Fuel Pump. $75
DUI Stealth HEI Distributer. $150.
Scheonfeld Metric Headers w/IMCA mufflers $140.
THESE ITEMS ARE ALL FOR SALE NOW!!!!!!!......................
JR Motorsports 383c.i. Short Block- Motor blew- two junk rods/pistons, crank is bad, and block is junk. Salvage 6 rods and 6 pistons, Huggins Cam and lifters, and lifter valley tray. Comes with a spare 4blt block. $200.
Double Hump Heads- 461 castings some porting work, Needs Valve job and new springs. Good not cracked $200.
JR Motorsports Steel Valve covers- with tubes welded. $10.
JR Motorsports 2bbl Intake cut out for a stock car, with phenolic adapter for holley $65.
JR Motorsports 4bbl Intake cut out for a stock car $40
Will make a package deal on the blown 383, spare 4blt block, Double hump heads, valve covers, and choice of JR intake. $450.
5.83 LW Gears- full spool 28 spline w/case $300.
2 Powerglide Racing Tranny's- Built by Autotransmatic-Roger Hadan- One complete with coupler and lines/ball valve. $450. The other one is Fresh(Still sitting at the tranny shop) $350. $750. for the both with all parts.
AFCO 13in springs
225lb BRAND NEW used one heat race $25
250lb Used very little $20
AFCO 91/2in Front Springs
1200lb $15
1000lb $15
Bilstein big body shock. 60/10 top mount weld cracked but shock is straight and still works-repairable $50.
WILWOOD 550 brake fluid $5
All WILL be sold and no reasonable offers refused. Give me a call if you have any questions, Thanks, Tom
Home # (402) 727-5749
Cell # (402) 719-4276
[email protected]
Contact Information:
Tom Clapper
Phone: (402)727-5749
Email: [email protected]
|
|
|
|
