View Advertiser Index
|
Posted on 11/9/2007
|
Modifieds selling everything,trailer,scales,motors
2004 Hoffman mod the frame a 68-72 chevelle and very straight never ran in 05 06 or 07 comes with 2 link, 4 bar, z link, pinto spindels, afco radiator, fast shaft drive shaft, sbc headers, 18" kirkley seat, winter rear end, bilstean shocks, 32 gallon fuel cell. All the parts go with the car. complete roller $4,000
Made in 2004 but never ran pro mod copy chassis Bare metric frame powder coated orange made for lear spring or can make a 2 link. Comes with steering box, upper and lower a-arms, spindels, spring cups. The rear clip is over sling and has all mounts to run coil spring Sliders, or spring perch with multiple mounting locations. Great looking chassis don't overlook. It is still new but just a bare frame only $1,000
Open 20' tandem axel trailer with large box with tire rack on the back of the box with observaction deck on top painted black the tires are 95% with crome rimes $2,500
Intercomp ez weight scales only used 5 times comes in carry case. Comes with home made role off pads $800
Used .30 over 350 block right hand dip stick stock crank not shure about pistons and rods. with 7qt. champ pan this motor is half way torn down so you can look at it better$700
New .60 over block left hand dip stick with stock crank not shure on pistons and rods, clamer pan complete long block completle tore down curently at the machine shop$1000
1 set of sbc pro heads 50cc 200 runners comp roller rockers$650 only 10 nites old
1 set of good sbc camel hump heads complete with roller rockers curently at the machine shop $500
1 4412 flow design carb with flow desigh 2 barrel adapter plate $350
1 gaerte 750 alky carb only 3 nites VERY NICE $1400
1 gm 3 speed tranny with a cracked case only 5 nights $100
1 gm 3 speed tranny used $75
1 5.29 9" ring and pinion a little ruff $50
1 4.11 9" ring and pinion rusty $50
1 4.71 9" full light weight aluminum spool 3rd member 28 spline great shape $550
2 Right hand lower control arms for 68-72 chevelle $65 each
1 left hand lower control arm for 68-72 chevelle $60
1 afco 20" adjustable j-bar $50
6 Mono-leaf and multi leaf springs $80 for all
2 Afco roller bearing sliders 1 is new $100 for both
3 spring loaded pull bars only 1 has a spring $50 for all
1 Howe stock type hydraulic through out bearing in great shape $85
1 10 1/2" 1 1/8" spline stock type clutch with good disk $250
sbc high torque starter $75
Lots of springs, afco shocks, rims
located in North central Kansas 15 miles from Chester Nebraska. I don't have any pictures for email so don't ask. If interested call me after 5:00 pm any day, I don't race any more so I need to sell this stuff I could make a complete car
Contact Information:
Jason Stephens
Phone: (785)275-1477
|
|
|
|
