View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale/ Wanted
350 +030, 1 piece rear main seal, polished crank, cast pistons, recond rods, melling pump, cloyes timing chain,
short block, $550
I have heads to make it a long block and have all the throttle body parts also for $900
350 +080 cast pistons, stock recond rods, polished cast crank, short block $400
(2) 350 blocks, +060 fresh bore and hone, line bored, decked,oil passages drilled and tapped, all treaded holes cleaned comes with clevite cam bearings and brass freeze plugs.$550
350 block, +060 used block cleaned up, good claimer block, $75
(1 left) 400 blocks, 4.185 bore, fresh bore and hone, line bored, head surface is true, $250
TRW forged pistons, L2256 used but good claimer pistons, $75
412ci forged pistons,4.155 bore, split set, 6 Lunati/ 6 Ross flat tops, c.h. and weight is the same. use a 6" rod and a 3.800 stroke crank. $200
Odd ball pistons, I have alot of them, do you need something to make a claimer set?
Various used rods call if looking for something to complete a set.
Cam Buttons - $1.75
Balance plates - $9.00
floater housing, been straightened, $50
Turbo 400 trans used and works good $100
Saginaw 3 speed trans, $100
Diesel Starter,fits 6.2 less than 1 week old, $75
2 barrel intakes, $15
4 barrel intakes $15
Equipment for sale...
Sunnen Rod Hone,basic tooling comes with it $300
WANTED
need a used set of 5.850 H-beam rods, large journal
76cc world products heads for a street project. 2.02/1.6 valves preferably
Contact Information:
Terry Cohoon
Phone: (712)449-5570 or 712-449-2682
Email: [email protected]
|
|
|
|
