View Advertiser Index
|
Posted on 11/9/2007
|
Parts For Sale
PISTONS
400 +030 flat tops, use a 6" rod and a 3.800 stroke crank $200
400 +030 flat tops these use a 5.700 rod and a 3.625 stroke crank. $300
350 TRW forged L-2256+030 pistons, $75
Crankshafts
Lunati 4340, 3.502 stroke, 350 mains, large rods journals, std, $375
BBC Mulodex forged crank, $350
350 cast crank, was balanced to a 6" rod and light piston, was used on the street only, never raced. $50
BLOCKS
400 +060 2 bolt mains, line bored, surfaced, $300
350 +060 4 bolt mains, line bored, flat decked, bolt holes cleaned and chased. oil passages drilled and tapped, stroker clearenced. $500
350 +060, 4 bolt mians, line bored, surfaced, bolt holes cleaned and chased, oil passages drilled and tapped, $450
350 blocks, bare $100
HEADS
(SOLD)441 heads mildly ported, new 2.02 intakes/ new 1.6 exhaust, new springs, retainers, locks.. screw in studs, $550(SOLD)
2 sets of 624 castings, cleaned crack checked and surfaced $100
1 pair newer heads, casting # 10110810 fits 91 and up 350s 65cc chambers, cleaned, crack checked, surfaced, fresh valve job, $300
Other Parts
Cam Buttons, made in our shop, $1.75 each
Balance plates, made in our shop, $9 each
Aluminum valve covers, short and tall, $25 set
Floater rearend, 1.5 offset, no brackets. $50
Saginaw 3 speed trans, $100
7.5 posi unit. $100
(2) 9" ford center sections, no gears, just carrier and housing. $30
Seat belts, 1 used set, $10, new set $25.
(New) muffler clamps,, 50 cents each, I have about 200 left.
400 turbo trans,good working $100
1986 Chevy pickup 4 speed trans, $200 with bell housing
Good running chevy 4.3 liter motor, smokes when first started but clears right up. $500
cherry picker lift cylinder, $20
Contact Information:
Terry Cohoon
Phone: (712)479-2682
Email: [email protected]
|
|
|
|
