View Advertiser Index
|
Posted on 11/9/2007
|
Part For Sale
1 - 441 head, clean, crack checked, & surfaced $75
2 pr. 487 heads, clean & crack checked (virgin heads) surfaced $150
1pr. 291 Double Humps cleaned, crack checked, & surfaced, 1.94/1.5, no porting, (virgin heads) $175
1pr. 186 Baby Humps, 2.02/1.6, no porting, cleaned, cracked checked, & surfaced $275
882 Heads $40 pr. cleaned and checked
2 - 400 Blocks, + .040, line bored, surfaced, oil passages drilled, ready to be honed $400 ea.
1 - 350 Block, +.040, splayed steel caps, $400
1- 400 block +060, line bored, bored , decked, $300
Rebuilt 350 motor,Std bore, New rings and bearings, fresh ground crank, new cam and lifters, new oil pumpand timing chain, just add your intake or I will install one for you. $900 with a core block or $1000 w/o.
Hobby Stock short blocks, 350 +040, trw forged 2256 pistons, fresh crank, new rods, $700... 1 is finished 2 others about done.
B-mod or Hobby short block, 350+040, KB flat top pistons, 6" rods, scat crank,balanced, 1 finished and 1 about complete. $1200..
GM rod cores, $10 set
GM rods, magged, resized, checked for straightness, good bolts, full floated,5.7 $150
GM powder metal rods, new in the box, 5.7 $225
GM , LS6 powder rods, 6.125 length, $125
TRW 350 + 030 forged pistons,domed, uses 3 9/16 stroke crank, $150
TRW 377 pistons, 400 +030, forged, domed, like new $275
Ross 406 forged pistons, for 6" rods, $300 last set I have.
I have several sets of good used pistons. What do you need for that spare motor??????????????
Ford 9",500 and 514 gears set up ready to go 31 spline,$300 each
4 speed tranny, complete, ready to use. not been lightned or raced, $400
Power glides, working condition $100 firm
FORD motor cores avalible call
2 - Team G aluminium intakes $100
2 barrel cast intakes, cleaned and checked, big bores, $50
Contact Information:
Terry Cohoon
Phone: 712-289-2211
Email: [email protected]
|
|
|
|
