View Advertiser Index
|
Posted on 12/28/2008 12:13:16 PM
|
JnJ IMCA stock car 2006
JnJ IMCA stock car 2006
pro street, pro am, open street stock
$5000
Can see at www.jnjfab.com it is the red white and blue chevelle as it was under construction #66 ! Had the white cutlass body the last two seasons. Now has a new straight chevelle body again!
5 feature wins this season, I only raced it 12 times this summer. Won 2 out of 3 races ran at I 80 against pro ams(broke motor other one) and 3 out of 4 at Deshler Nebraska IMCA stocks (Spun other race still got back to 3rd). 3rd at UMP Nationals.
112" chevelle frame. NEW 75 chevelle body on car sanded and ready for paint right now. Complete extra car with perfect 77 cutlass body to reskin. 2 sets of fenders and hoods for 75 chevelle.
floater was brand new this season
adjustable lower trail arm mounts
gundrilled axles
hawk racing brake pads
braided brake lines all 4 corners
10.5 small diameter rear rotors
fire system on board 10 lb
helmet air system
all new suspension parts 2008. 12 nights total.
new radiator,shroud
new msd dist, box 6al, high perf coil
gundrilled axles
camlock rci harness
elect water temp gauge
fuel psi light
water psi warning light
water temp warning light
oil psi warning light
ps pump with reservoir attatched, serp pulley.
$5000 minus motor,trans,shocks and gear with all the spares.
Choose a used seat from about 15 I have that fits you!
This will include ps pump and mount. Includes the radiator, shroud, radiator hoses, driveshaft, fuel pump and fuel line to the carb. Truly minus motor,trans, shocks and gear.
spares include:
lower a arms new bushings,balljoints
1 set of spindles
uppers new bushings, shafts, balljoints
driveshaft
centerlinks 3 new in boxes
offsett upper a arm shafts 3 new in boxes
idler arms 2 new
tie rods 2 complete sets
pile of upper and lower arms oem
4 fenders, 2 hoods, complete 77 cutlass roller.
I can make the car race ready for 8500 total including all spares. This includes msd dist, a good 350cfm IMCA carb, alum water pump, fan, 3 disc clutch, lw bellhousing, muncie lightened trans, air cleaner. 12-1 355 or 383.
I will order a new 3rd member with mini spool and install it for you.
My cars are easy to work on. Easy to adjust for dry tracks. I raced this car at 3140 all of 2008 or less. New body on car is gutted to the NEW IMCA rules and car is now scaled to hit the track at 3090 with driver of 180#s. I would run it like this on a dry track, I would remove 60lbs for the heat. Its got 180#of lead bolted in it to get to 3090. Will sell with lead to adjust car as needed. You can pull the motor, trans, headers with distributor still installed all at once! 15 minutes to have it all out on the ground! All electrical stuff unplugs with trailer connectors. Msd box, electrical idiot lights etc!
Jeff
Contact Information:
Jeff, Mc Clelland,Ia
Phone: (712)310-1183
Email: [email protected]
|
|
|
|
