View Advertiser Index
|
Posted on 7/10/2009 11:56:22 AM
|
Tons of parts, gears, shocks, etc updated list
e85 2 barrell rochester done by bill gibson from midstate machine $300 (this is the 024 casting iwth the truck boosters)
brand new set of pro adjustable shocks for metric car never been on car $150 for all 4
the new bilstein hobby stock shock packge this was only ran on the car during practice but is missing the 6010 shock this kit is like $500 minus the 1 shock $300
rebco scales VERY WELL TAKEN CARE OF $650
gears 5:43 and 6:00 both 28 spline with miny spool $250
mini vip box from DUI igntion that puts out 18v to coil at all times even if battery is low $75
racing distributor with supercoil and racing module $75
tublar a-arms with low friction ball joints 2 aluminum cross shaft right sides $40
right side lower a arm with low friction ball joint ready for car $40
several lower a-frames, spindles, trailing arms $25 each piece....4 right side lowers, 3 left side lowers, 5 left side spindles, 2 right side spindles, 7 upper trailing arms. Buy them all for $400 21 pieces total and I will throw in a brand new upper and lower ball joint.
box full plug wires - prc,msd and a few other brands 3 full sets of the good racing wires used but are still good $50
1100 front spring 11" $20 and I will throw in a prc spring rubber
25% reduction pulley set aluminum for long wp $30
2 holley jet kits $40 for both
aluminum long water pump jr brand $25
hobby log style exhaust manifold for right side and a normal left side manifold with exhaust pipes $30
cutlass body complete car glass is still in it..not a lot of rust but rear horns are rusted out. $300
cutlass decklid...2 doors already gutted..$50
hobby stock rear bumpers I have 2 heavy 1 and 1 light one $25 each
box full of clamps for bolt on weights $25 there are atleast 20 plus clamps in there over half are brand new
set of lt1 exhaust manifolds needs pipes $75
left side lt1 manifold $30
3 good acdelco fuel pumps perfect for hobby stock they have fuel lines on them raced in our different cars $25 for all 3
XL DCell device used maybe a dozen times with brand new helmet attachments $225 sells for $425 new
brand new JR number 8 camshaft $50
elgin roller rockers 1.6 long slot used for 2 nights $50
full set of elgin 1.5 rockers but missing the nuts brand new $15
15" steering wheel aluminum with black cover $20
OEM set of brake rotors no yet drilled for 5/8 studs just as backup in trailer with lug nuts $10
chevy starter the bigger 1 for big flywheel $10
cvr starter that needs new solenoid $15
2 used timing covers with a set of talk valve covers with tubes in them $10
Helmet blower with filter (Filter could used to be cleaned but good) $25
stack of normal 350 exhaust manifolds - free if you pick them up
158 tooth flex plate $10
flexplate for 1 piece rear main seal motor $25
race skins that where on my old car (2 doors, 2 fenders, hood, decklid)
cast chevy 350 water pump - free if you pick it up
oem power steering pump with lines and bracket - free if you pick it up
I am located in Des Moines, IA. I have no problem shipping any of this stuff but you cover freight. I can take mastercard, visa, and discover if you want.
Contact Information:
Steve Clair
Phone: 515-897-8970
Email: [email protected]
|
|
|
|
