SBC engines, heads, blocks, etc.
FOR SALE-
412 SBC, 400 bored .060, Scat cast crank, 6� Eagle I-beam rods, Hypereutectic flat-top pistons, Moly rings, Michigan bearings, Dart 49cc heads, Edelbrock 2701 intake, Comp cam & roller rockers, Kevco 8qt oil pan, internally balanced, built & dyno�d at JR Motorsports, run only 6 nights, $2,500.
350 Holley KB carburetor with spacer plate & offset air cleaner, $150.
30/30 Biltstein 9� shock, used only once, $100.
350 SBC shortblock, 283 block w/4� bore, 2-bolt main, Small journal, 3.48 stroke, NEW Prowler 5.7 rods, NEW Engine-Tech flat-top pistons , NEW moly rings, Stock 350 crank, Clevite rod, main & cam bearings. This can be used for a Hobbystock or street motor, $900.
355 SBC shortblock, 350 4-bolt main block (#3970010), Scat 6� rods (SCA36000), SRP LW flat-top forged pistons w/plasma moly rings (SRP271056), Std/std cast stock crank, Michigan rod bearings (CP663P), Michigan main bearings (MS909P), Durabond cam bearings (CH8), NEW frost plugs, JR Motorsports machine work (Bored .030, honed, Decked surface, Check line-bore, Crack checked, Cleaned & polished crank, Thermo cleaned block, Pin-fit pistons, Balanced rotating assembly), $2,000.
383 SBC shortblock, Reconditioned stock 5.7 rods, Hypeurtectic 12:1 pistons , NEW moly rings, 400 crank, Clevite rod & main bearings, HV oil pump, Double roller timing chain w/cover, Flexplate, Newer good harmonic balancer, 7qt oil pan, FULLY balanced, $900.
882 SBC heads, Stock valves, 1.94/1.50, 3-angle Valve job, NEW .600 springs, NEW retainers, NEW hardened locks, Mildly opened intake ports, Pinned studs, $300/set
882 SBC heads, Stock valves, 1.50/1.94, Fresh 3-angle valve job, NEW .550 Z-28 springs, NEW retainers, NEW hardened locks, Drilled for steam holes, Ready to bolt on, $300/set
993 SBC heads, Stock valves, 1.94/1.50, 3-angle Valve job, NEW Z28 springs, NEW retainers, NEW hardened locks, $300/set
454 steel crank, Fresh turned .020/.020, 2-pc rear main seal, Ready to install, $300.
350 SBC block, Bored .040, Honed, 4-bolt mains, $350.
400 SBC block, 509 block, Bored .030, Cleaned & crack checked, 2-bolt mains, $300.
(2) 400 SBC cranks, $30 ea.
SERIOUS INQUIRIES ONLY!!!!!
Contact Information:
Rick Speck
Phone: (641)751-3648
Email: [email protected]
|
