View Advertiser Index
|
Posted on 2/28/2010 10:06:19 AM
|
355 SBC longblock, $3500
350, 4-bolt main block (#3970010),
Std/std cast stock crank,
NEW Scat 6� rods (SCA36000),
NEW SRP LW flat-top forged pistons w/plasma moly rings (SRP271056),
NEW Michigan rod bearings (CP663P),
NEW Michigan main bearings (MS909P),
NEW Durabond cam bearings (CH8),
NEW frost plugs,
NEW Edelbrock RPM alum intake (7101),
NEW Tall circle-track steel valve covers,
NEW Erson Cam,
NEW Comp roller-tip rockers,
NEW Elgin pushrods,
NEW EDM lifters (This engine REQUIRES EDM lifters),
Felpro full gasket set,
NEW EQ 76cc IMCA spec heads, (1.94/1.50 valves, Moroso valve cover studs, Chrome spreader bars, 167cc intake runner, 3/8� screw-in studs, NEW Elgin head bolts, Upgraded Erson springs),
JR Motorsports machine work (bored .030, honed, Deck surface, Check line-bore, Crack checked, Cleaned & polished crank, Thermo cleaned block, Pin-fit pistons, Balanced rotating assembly).
Contact Information:
Rick Speck
Phone: (641)751-3648
Email: [email protected]
|
|
|
|
